| RHYTHM \\ TRACK
The Rhythm Track is versatile rail system built for live sports, entertainment and motion picture productions.
Quick Set up
No floor space? No problem. Mount it to any conventional 12’ box truss, this configuration gives you more flexibility without loss of performance or payload capacity.
56V 16AH High Output Cells, Industry leading run times, with 10+ hours of constant operating.
A single operator and tech can have 100ft of track and camera up to the truck in under an hour.
Fully autonomous programable moves reduces operator fatigue and improves shot accuracy. Alternatively, moves can be recorded, stored and played back.
Adjust speed, acceleration, and landing all at your finger tips, on the fly with the pulse controller.
Doing an interview?
Don’t worry, whisper quiet motors drive the sled with ease.
Built for the most demanding cinema and broadcast productions
Our solutions are unmatched in every way when it comes to safety, power, runtime, range, programmability, payload...
Without 48v Batteries and rise.
Bare Sled Width = 16.5”
Bare Sled Lenght = 45.25”
Bare Sled Height = 9”
Total weight of the Rhythm track (minus the head, camera, wireless video or plug and play accessories).
18 x 21 x 51
Rhythm Track assembled
ready to ship
Rhythm Sled weight
Custom Road Case
When you need a simple fixed camera position, our standard riser options have you covered. With higher payload capacities than our digital riser and simple bolt-on-and go design, the 3 different sizes of 12”, 24” and 36” are an easy solution when you need it.
Maximum Payload on the digital riser.
Digital riser allows smooth vertical moves up to 7ft in lens height. Riser is powered internally through the system and controlled via the pulse controller or optional pedal control. Riser has variable speed control and silent operation.
Maximum lens height of 7ft at full digital riser extension with mitchell riser.
With multiple redundant safety stops, the Rhythm Track gives operators the ease of mind and confidence to focus on the shot.
Capative Safety Brackets
3 leveLs of safety
1. Operator can digitally set
an endstop anywhere on the tracks
2. Operator can drive sled
to each end of the track to auto engage an end stop.
3. Physical stops are attaached to the track to ensure sled is always captive on the track.
SMArt. SIMPLE. SAFE.
Optional LIDAR sensor integrated in the sled pauses control if someone steps on the track. This feature adds confidence to operators potentially operating in a separate room where consistant visibility is not availalbe.
There are multiple redundancies built into the systems saftey features. From digital end stops, captive track, end point triggers to physical stops. Saftey Brackets are placed at the end of the track giving you that extra sense of security.
Extruded aluminum track with hardened, low friction coating
Adjustable feet for simple leveling and heigh adjustment
Curved track available with custom radius as tight as 9’
No restriction on maximum length
Easy connect hardware locks track together with minimal tools and effort 100’ of track can be assembled by 1 operator in >30 min
Rail dissembles and packs down flat for easy transport